Microsafe is a product for deep disinfection of all types of surfaces in the Industry, especially the Food industry. Bactericidal and fungicidal efficacy.
Registration Number D.G.S.P .: 19-20 / 40-06353-HA.
Microsafe meets the UNE 13697 standard with bactericidal and fungicidal efficacy in clean conditions. Efficacy against Listeria monocytogenes.
Formulated with a synergistic combination of active agents that gives it a high capacity for disinfection against a wide range of microorganisms. Great speed of action.
It is indicated for high-level disinfections in surfaces and equipment, cutting tables, conveyor belts, cutting rooms, warehouses, refrigerators.
Suitable for use in any company that requires a high degree of disinfection.
Do not mix with other chemical products. Incompatible with organic matter, it shall be applied once the cleaning tasks are finished.
The necessary measures should be taken so that the food, machinery and / or utensils that are handled, do not contain residues of any of the active components, for this purpose Microsfae must be properly rinsed with water.
In air conditioning equipment it will be used in a timely manner with subsequent air recycling for one hour in the absence of people. It should not be used continuously by mechanical application with dispenser.
Aspect: Liquid not transparent
Density at 20ºC: 1,01 g/cc
Solubility: Fully soluble in water
Doses: 0,5% – 1%
A thorough cleaning must be carried out before applying this product.
Manual: Dilute between 0.5% and 1% with water and apply on objects with the help of a clean cloth or brush. Ensure correct wetting of the entire surface. Leave on for at least 15 minutes. Rinse with water. In the case of cleaning sinks, dilute 1% with water and pour 5 liters into each sump. It is not necessary to rinse.
Spraying: Dilute between 0.5% and 1% with water. Spray with a hand gun, spray backpack or spray the surface to be disinfected with hose. Leave on for at least 15 minutes. Rinse with water. In the case of air conditioning equipment, dilute the product from 0.5% to 1% with water. Leave on for at least 15 minutes. Rinse with water.
Immersion: Dilute from 0.5% to 1% with water. Enter the objects to be disinfected. Leave on for at least 15 minutes. Rinse with water.
Aerial disinfection: Use with cold nebulizer device. The product is used undiluted. Apply 6 to 12 ml / m3. Aerial disinfection will be performed by specialized personnel and a 24-hour safety period is recommended in the absence of people, ventilating properly before re-entering the premises. Before disinfection, clean the surfaces, close the room tightly and plug the air intakes. A subsequent rinse should be carried out with drinking water that eliminates waste.
See the Product Safety Data Sheet.
The Raw Materials used meet the criteria of Sustainable Development promoted by the “Charter Project for Sustainability”.
The surfactants contained in this preparation meet the biodegradability criteria stipulated in Regulation (EC) No 648/2004 on detergents.